|Your cart is currently empty|
- STARTER SETS & KITS (6)
- ROBOTICS (39)
- ARDUINO COMPATIBLE Microcomputers (6)
- ARDUINO SHIELDS (21)
- RELAYS and POWER CONTROL (24)
- DISPLAYS: LCD + (10)
- SERVOS+MOTORS (18)
- IC's, OptoElectronics, LEDs, Regulators (57)
- ELECTRONICS PARTS Assortment Kits (29)
- RESISTORS-CAPACITORS (23)
- COMMUNICATIONS: Wireless, Internet, GPS, Serial, RS485, IR (28)
- ELECTRONIC BRICKS (61)
- SENSORS + SWITCHES (53)
- CABLES + Wire + Connectors (34)
- Power+Batteries (15)
- Electronics Assemblies + Displays (43)
- Arduino Accessories + Programmers (3)
- LAB: Prototyping + Tools + Test Equipment (25)
|View Larger Image||
DS18B20 Temperature sensor
DS18B20 "1-Wire" Digital Temperature sensor( 1 piece price)
Click on image above for pinout.
This is an electronic thermometer which has high accuracy over a wide range (accurate to ±0.5°C over the range of -10°C to +85°C). You can locate these thermometer chips up to 100M away from your Arduino, over just 2 wires. Multiple thermometers can be connected on the same wire because every one has it's own internal address.
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central microprocessor. It has an operating temperature range of -55°C to +125°C and is accurate to ±0.5°C over the range of -10°C to +85°C. In addition, the DS18B20 can derive power directly from the data line (“parasite power”), eliminating the need for an external power supply.
Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems.