MAKER MicroComputer Engineering Set (Worldwide Version)

SCHOOLS please note: This is your applicable discount;. It is not in addition to the Educational Discount. 

Please note: Large Quantities may have a longer lead time. Special prices available for quantities over 500. Please email for details:terry@yourduino.com.

(CLICK IMAGE ABOVE - Then Click upper right for more photos) 

This YourDuino Kit is often used in School / University Engineering courses, and by users who want the added components shown below. See How-To / Lessons HERE:

This kit adds to our Maker Version set these items:

• 1 - Ultrasonic Distance Sensor [Digital Signal Input]
• 1 - Mini Digital Voltmeter [Visual Display]
• 1 - Small Stepper Motor with driver board [Digital Signal Output]
• 1 - Bluetooth HM-10 Transceiver board [Digital 2-way Communications with Smart Phones, etc.]

SHIPS Worldwide.  See the North American USA Version HERE (Same contents, different box)

CLICK on Image above, then hover upper right to see other views.

Arduino-compatible Starter Set with YourDuinoRoboRED Heavy-Duty Case  with: YourDuinoRoboRED (Arduino UNO Compatible) , USB cable and the many components shown below. This is particularly good for Schools, Maker groups and Libraries where sets can be easily carried around and stored compactly.

Includes the following features:

• YourDuinoRoboRED Arduino-UNO-compatible with built-in 3-pin I/O connectors, higher-current %.0V and 3.3V supply (SEE DETAILS HERE)
• 5 - Big push-button switches [Digital Input]
• 2 - 10K Potentiometers that fit breadboard well  [Analog Input]
• 5 - 10K PhotoResistors (Light sensors)   [Analog Input]
• 1 - Ultrasonic Distance Sensor [Digital Signal Input]
• 1 - Mini Digital Voltmeter [Visual Display]
• 1 - Digital temperature sensor LM35 [Digital Signal Input]
• 50 - LEDs - 5 assorted colors, plus 10 220 ohm resistors (below) [Digital or Analog Output]
• 1 - Red-Green-Blue Multicolor LED  [Digital or Analog Output]
• 1 - Buzzer Module (makes sound with voltage applied) [Digital Output]
• 1 - Beeper Module (Makes different sounds/tones with Arduino TONE Library) [Analog Output]
• 1 - Servo Motor (Mechanical positioning from digital pulses] [Digital Signal Output]
• 1 - Small Stepper Motor with driver board [Digital Signal Output]
• 1 - Bluetooth HM-10 Transceiver board [Digital 2-way Communications with Smart Phones, etc.]
• 2 - 3-pin cables to 3-pin connectors that fit the Robo1 and various Electronic Bricks etc.
• 2 - 3-pin cable to separate wire ends that connect the Robo1 to any device
• 1 - USB Cable (50cm)
• 1 - 40 wide flat rainbow color cable that can be separated to make many different cables
• 2 - 40 pin strips that can be separated to connect cables to breadboard and other devices
• 10 - each 220 ohm resistors (LED current limit etc.) and 10K resistors (switch pullups etc.)
• 1 - 8cm high-quality Breadboard with power and ground strips
  

Please Read This Electrical Safety / Disclaimer page before using the relay board in this product.