YourDuino MEGA2560 R3 (UpgradedPower: 5V 2A)

SKU: AA-021215
Stock: 6

Price:

$45.00

Quantity:	25+
Price:	$18.00

Overview Tell a Friend

Early Version: To Be Discontinued

Upgraded Power version (5V 2A available with external power) compatible with Arduino MEGA 2560 R3

The MEGA version of the Arduino has much more memory and many more I/O pins. Click on photo to see larger version. THEN hover over upper right to see more photos.

The R3 version has added pins for use with newest shields that fit the Arduino DUE. It can be used anywhere the regular 2560 was used.The Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.

This Mega 2560 compatible Advanced is a microcontroller board based on the ATMEGA2560-16AU , fully compatible with ARDUINO MEGA 2560 REV3.
It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, 2 ICSP headers, and a reset button.
It contains everything needed to support the microcontroller. With its bootloader, program can be downloaded directly with USB and you don’t need to use other external programmer.
Just simply connect it to a computer with a USB cable or power it via an external DC power jack (DC 7-12V) or via female headers Vin /GND (DC 7-12V) to get started.

Note: the most important difference between our MEGA 2560 compatible board Advanced and regular MEGA 2560 R3 board is the voltage regulator chip used in the board.
The voltage regulator chip used in keyestudio MEGA 2560 R3 board is NSP1117. When connect the external power, output 5V, the drive current is 1A. However, keyestudio MEGA 2560 compatible board Advanced features the voltage-regulator chip MP2307DN. When connect the external power, output 5V, the drive current can be 2A.

The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch, it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.

SCHOOLS please note: Quantity discounts shown are your applicable discount;. It is not in addition to the Educational Discount. You will get the 25 quantity price on smaller quantity with Educational Discount.

See detailed information on the Mega HERE: